Our bent laminated glass conforms to the applicable criteria of ASTM C1464,
as it relates to resin C1172, C1036, and as it relates to heat-strengthened
or tempered glass used in the laminated assembly C1048. Our laminated
glass is the subject of a written ten-year warranty statement⁴.

IMPORTANT: Unless otherwise acknowledged in writing, glass
certified as laminated is assembled with a Glasslam VRE117® *OR*
a Zircon Astrocure 10G (1000G)® interlayer. Laminated glass must
ONLY be installed using compatible glazing materials as approved by
the manufacturer of the respective interlayer material. All edges of our
laminated glass MUST BE CAPTURED in framing with a minimum
5/16-inch bite except for edges specifically acknowledged as exposed.

WARNING: Laminated glass meeting the requirements of CPSC 16 CFR 1201
and ANSI Z97.1-1984 is defined as a SAFETY GLASS PRODUCT for architectural
safety glazing in the United States of America. Only glass fabricated by Precision
Glass Bending, and issued with an individual permanent logo or certificate stating
it has been laminated in conformance with these requirements, is certified to be
laminated with the category I & II safety designation. Laminated glass assembled
with plies of annealed glass must NEVER be used in those instances where plies
of heat-strengthened or tempered glass are required by the law, thermal or
mechanical loads, or applicable codes. Only plies fabricated by Precision Glass
Bending, and issued with an individual permanent logo or certificate stating they
have been heat-strengthened or tempered, are certified to be heat-strengthened
or tempered glass. All laminated glass assembled with plies of heat-strengthened
or tempered glass can experience spontaneous breakage, though plies of
heat-strengthened glass are less prone.

VRE117 is a trademark of Glasslam NGI, Inc.
Astrocure 10G (1000G) is a trademark of the Zircon Corporation.